B-GEAR
1. Background Development
The conflict between the Phillon planet aborigines and Artum project associates increased as time passed. The Artum project associates could not cope with the aborigines' constant attacks. The lobbying on Phillon battles has become intense on the administrators of military safeguards which also triggered a media frenzy in this case. This kind of situation brought continuous fear to the people of the Artum project. Finally, Next Generation Co. Ltd, a representative military safeguard company, started producing new battle weaponry to defend against the Phillon aborigines. After having officially taken 5 dispatch tests, the B-Gear airframe was produced.
2. Basic Armament
The basic armanments of the latest B-Gears are, of course, air weaponry. For basic weaponry, Next Generation Co. Ltd has developed the Auto Contact applicable weapon, which is a series of machine gun types. Other than this, all the weapons can be used if an Auto Contact is applied. However, the tuning process hasn't happened since its first release, resulting in a little retrograding relative to the continuous development of Gears. In addition the Gear has a Homing Missile for its heavy weaponry.
3. Airframe Characteristics
The weaponry for this airframe may be a bit weaker, but the airframe itself stands as an example for any other Gears. First of all, the engine's supplier has changed to the Freeway Co. Ltd for a Fr type Engine, after the failure of 5 trial developments from another manufacturer. The F type engine is, as everybody knows, a basic engine for the I-Gear specialized for speed, but the Fr type equipped on B-Gears is an upgrade of the F-Types' main frame that shows an increased torque ability by up to 20% affecting the basic output, high speed flying, etc. Here, the aspect affecting the engine ability, is the computer. As a result, on the fourth experiment, the computer was replaced to the Model 6-Tenpole Line; a model produced by H.E.E Co. Ltd. This military computer is the former model that is equipped on an S-Gear, but compared to the No. III Model, it has a better analysis ability of ground heat, realism simulation and response to pilots commands. Therefore, the H.E.E Co. Ltd Model 6-Tenpole Line No. II 4.15Thz was selected as a computer for the B-Gear. Overall, the basic weaponry is weaker than in other airframes but the performance of the airframe itself is great. Therefore, this airframe is recognized as a main unit for the Decaians with all the mentioned merits especially for air-to-surface combat and simulation.
4. Fundamental Design Data
Official Name
Brandy Burg
Manufacturer
Next Generation Co. Ltd
Type No.
NGT-BB-1-BG
Serial No.
NGT-B1-EXR
Player
Decaian Pilot
Purpose of Usage
Attack, Defense, Ambush, Guard
Function Method
Gear and Cable, Board
Source of Energy
Gas Optical Molecular Form
Communication Distance
Under 75Km (Depending on Satellite Radar on distances over 75Km)
Output
Minimum Output
1,170hp
Ordinary Output
2,850hp
Maximum Output
3,550 HP (Equipped with After Generator for Chip Creep)
Main Weapon
Basic Weapon
All weapons that can use the Auto Contact system
Strategic Weapons
Chip Creep Launcher
Armor, Resources
Height
4.048m
Length
13.650m
Width
8.15cm
Airframe Mass
4,885Kg
Weapon Mass
Basic 3,121Kg + Chip Creep 1,565Kg
1st Armor
101.74mm
2nd Armor
82.35mm
Armor Material
Parallel Acrylic Steel, Strong Moissanite, Carbon Steel
Pilot
1 person (Associated with only controlling the motion related to Gear's attack, defense, etc.)
Computer
H.E.E Co. Ltd brand of Model 6-Tenpole Line No. II 4.15Thz, 0.960k TM Memory
Engine
Freeway Co. Ltd brand of Mr. F Series No. III Fr
Max. Speed
4,620km/H
Mach Back
1,200km/2.43sec
Max. Gravity
13.37G
5. Main Computer
If you don't count the Gear's engine the most important component is the internal computer. The basic model is equipped with a Model 6-Tenpole Line No. II 4.15Thz manufactured by H.E.E. Co. Ltd. This computer is especially effective in the way that it can calculate simulation data through a ground thermal sensing device, allowing surprise attacks. In addition, an automatic signal sending system to the home control tower in case of an emergency or the simulation database all prove its excellent capabilities. With the linkage of the Cache and K-32 Custom Cache, which has a bandwidth of L2, L3, L4 and L5, it senses ground heat and simultaneously land structural modeling. This is also linked with the data of the super computer in the headquarters. The 3A system makes it easy for the auto attacking system, auto sighting system, and auto height control system to sense heat which eventually makes it easy for the pilot to manipulate the airframe.
6. Main Engine
The B-Gear Version II Type S is equipped with a Fr type engine, which is the third series of the F-Type manufactured by the Freeway Co. Ltd. Officially, this engine is close to the F-Type series but is calibrated more efficiently. It is concentrated more on torque than speed, resulting in a higher output. Because the F-Type is produced specially for B-Gears, the loss of fuel and heat is near to 0%. However, it is frustrating that the delay of after burn is longer as that of other airframes, but due to a large fuel tank this disadvantage can simply be supplemented.
 
Official Name
Fin Point Resolution
Manufacturer
Freeway Co. Ltd
Type No.
FW-F300-03
Serial No.
FWC-F3-Fr
Type of Airframe
B-Gear
Operation Form
Inspiration, Explosion, Ventilation
Function Method
Pressure Sensing Accelerator
Oxidizer/Solvent
Liquid/Atom Separable Photosynthesizing Liquid
Main Resources
Basic Output
1,390hp
Min Torque
48,671kg
Maximum Output
3,020hp
Max Torque
95,722kg
Operation Hour
16h ~ 27h
Energy Expenditure
38,000cr ~ 59,990cr/H
Weight
775.7kg
Noise Level
B
Vibration Level
A
Link System
OK